2. Wedge Wire Filter Tube Welding Machine This Wedge Wire Filter Tube Welding Machine is specially-designed for welding filter tubes for any filtering purposes in chemicals, mining, environmental protection, as well as many other industries.
    2. Shot Blasting Machine Shot blasting room
      Cylinder inverting device
      Blast gun moving system
      Cylinder rotating device
    2. Serpentine Tube Bending Machine We provide two different serpentine tube bending machines: one for bending microchannel flat aluminum tubes used in automobile evaporators, and another for bending round metal tubes for heat exchangers.
    2. Concrete Pipe Cage Welding Machine DC power can assure the welding speed, prolong the life of welding electrodes and save at least 30% electric consumption
      PLC, inverter, touch screen are imported
      Densely-wind length on both ends of the cage and the hoop reinforcement interval can be pre-set on the touch screen.
    2. CNC Tube Bending Machine Three-axis numerical control, hydraulic clamping
      Gear and rack driving, each axis is equipped with high precision planetary reducer
      Tracking die is restored pneumatically
      CNC control, 12.1” touch screen operation, simple and easy
    2. Amorphous Transformer Machine This amorphous cutting machine is specially designed for automatic cutting and stacking amorphous strips for cores.
      This line adopts PLC control, servo drive, touch screen operation and high precision mechanical transmitting mechanisms, thereby ensuring high automation, high productivity and high reliability.
    2. Spiral Duct Forming Machine Special mould for various diameters, very easy to change and adjust, crane or too much manpower are not needed
      Large diameter range
      High speed synchro flying cutting system
      PLC touch screen control, convenient operation
    2. Steel Coil Wrapping Machine This wrapping machine can be used to packing various materials, such as laminated film or dampproof paper tape etc. After being wrapped, the products are good-looking, waterproof, anti-rust, which are easy to transport and store.
    2. Rolling Shutter Slats Roll Forming Machine This roll forming machine can produce rolling shutter slats with polyurethane foam online injected. Its PLC control system such as PLC, touch screen, inverter and encoder are imported from Japan.
      - Steps of rollers: 32 stations
      - Length of main machine: 24 meter
    2. Color Steel Tile Roll Forming Machine The product of this roll forming machine features novel appearance, level surface, uniform ripple, high usage and automatization, low cost and durability.
      The product of our color steel tile roll forming machine is widely used in civilian construction, such as plants, hangar, gymnasium, exhibition hall and theaters.
    2. Motor Making Machine The rotor coil winding machine is especially used for winding coils for motor rotors. This device comes with PLC control system, touch screen operation, as well as automatic wire traversing.
    2. Roller Bending Machine This roller bending machine is a primary product of our company. When pre-bending end, the length of flat edge can be set freely. And the top roller can move up and down. Drum-type upper roller is suitable for wider plate thickness range.
      High precision end pre-bending
    2. 3D Panel Welding Machine This 3D panel welding machine is used to produce structural reinforced concrete panel, also called "3-D" panel. This three-dimensional panel usually adopts 50mm thick uninflammable polystyrene panel as core. One side or both sides of the panel are covered with steel wire welded mesh.
    2. Tube Spinning Machine Two axis CNC control, small error, high speed
      Hydraulic system is equipped with water cooling system
      High speed mandrel speed 2800rpm, inverter control, speed adjustable
      Automatic loading, unloading Main Technical Data of Tube Spinning Machine
    2. CNC Plasma Cutting Machine This CNC plasma cutting machine can be designed and manufactured according to customer's requirements. Different plasma power for different thickness, different cutting length and width, different control systems and quantity of plasma or flame cutting torches are available.
    2. Capacitance and Dissipation Factor Meter This capacitance and dissipation factor meter is an up-to-date test instrument for measuring capacitance and dissipation factor (dielectric loss and impedance) for full automatically voltage devices such as transformers, cables, capacitors, insulators, HV switches, arresters, etc.
    2. LV Foil Coil Winding Machine We have both LV foil coil winding machines and HV foil coil winding machines available for dry transformers and high quality oil immersed transformers. The LV foil coil winding machine is available in 800mm, 1100mm and 1400mm width, single-layer or double-layer.
      Our HV foil coil winding machine is specially designed for high voltage foil coils, high automation, and high precision.
    2. Vacuum Annealing Furnace This annealing furnace is specially designed for releasing inner stress inside wound CRGO cores and decreasing their iron loss.
      It is inner-heating, vacuum, nitrogen-cooling, front load type with trolley.
    2. Transformer Oil Vacuum Filtering Machine This series transformer oil vacuum filtering machine is a kind of typical double-stage vacuum oil purifiers and can process and recycle transformer oils efficiently under vacuum conditions. It is capable of dehydrating, degassing, as well as purifying various insulation oil utilized for high voltage transformers, circuit breakers, etc.
    2. Vacuum Drying Furnace This vacuum drying furnace adopts variable-pressure drying principle suggested by Dr. Moll from Germany, which is specialized for drying transformer bodies. Compared with conventional vacuum heating drying methods, the variable pressure type can save up to 30-45% drying duration.
    2. Corrugated Tank Machine

      We have a complete range of machines for making transformer corrugated tanks:  
      1- Transformer corrugated tank fin forming machine
      2- Transformer corrugated tank fin welding machine
      3- Corrugated fin reinforcement spot welding machine
      4- Corrugated fin wall bending machine
      5- Powder coating line

    2. Battery Making Machine This machine is specially designed for casting board and grids used in batteries. It can melt lead, keep constant mould temperature, feed certain lead liquid, cast and trim edge, all in one machine.
    2. Paper Stick Making Machine The paper stick manufactured with our automatic paper stick making equipment is generally used by cotton swab and lollipop. The cotton swab stick making machine is characterized by high automation, high production speed, simple operation, and easy maintenance.
    2. Power Quality Analyzer The power quality analyzer helps to locate, predict, prevent and troubleshoot problems in power distribution systems. It is featured with big size memory, suitable for long-time analyzing and collecting data of power grid; its software analyzes data collected and uploaded into PC.
    2. Transformer Test System Transformer test system is an integrated test bench, combined with several test instruments and equipment for a variety of routine tests on transformers. It can provide reliable data for supervising and manufacturing distribution and power transformers.
    2. Steel Tube (Cylinder) Necking-in & Closing Machine Our steel tube (cylinder) necking-in & closing machine uses an automatic medium frequency heating method for hot spinning. It can be used for both necking in and closing steel tubes and cylinders. It can close flat ends, spherical ends and elliptical ends, with a freely adjusted necked in mouth diameter.
    2. Busbar Bending Punching Cutting Machine This machine integrates the functions of punching, cutting and bending, embossing, twisting, flatting, pressing tie-in, etc. Our busbar bending punching cutting machine is specially produced to process aluminum and copper busbars used in electric power, high/low voltage electric apparatus and busway industries.
    2. Metal Spinning Machine Full automatic, CNC control, the running track, speed and directions of spinning wheel, as well as the spindle speed are controlled by program, easy to operate.
      Siemens control system and humanized interface make it convenient to modify the programs.
    2. Water Jet Cutting Machine This cutting machine is free of heat-affected zone (HAZ) or heat distortion.
      It provides easy control, high accuracy and excellent edge finishing without frayed edges or burrs.
      Small kerf size (usually less than 1.2mm), low waste.
      This water jet cutting machine can cut almost all kind of materials, even sandwich panels.
    2. Hydraulic Press Four-column structure, simple and economical
      Hydraulic system adopts pin-fit valve integration system, with the advantages of reliable action, long life, small hydraulic impact, no leakage.
      Electric control system is separate. You can pre-set fixed stroke or fixed pressure.
    2. Thermal Spraying Equipment The plasma spraying equipment is composed of spraying gun, power rectifier, control system, cooling system, powder feeder, etc. It utilizes plasma arc as heat source, and uses powder as coating material.
    2. Wheel Rim Bending Machine We can provide all the related machines for producing wheel rims, such as rim bending machine, rim butt welding machine, rim trimming machine, rim rolling machine, and so on.
    2. HVAC Duct Forming Machine We can provide a variety of HVAC duct forming machines, including spiral duct forming machine ...
    2. Square Duct Production Line III The production line III mainly consists of electric decoiler, leveling & grooving device, hydraulic notching & punching device, hydraulic shearer and hydraulic folder. The precision and reliability of this Square Duct Production Line III is guaranteed by using a computer with a closed-loop servo-system in the electrical control system. Various production lines can be configured according to your detailed requirements.
    2. K Span Roll Forming Machine This MIC-240 super K span machine developed by us adopts the same technology with ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, hydraulic / electric mould cutting device, curving panel forming unit, control system, run-out racks for straight, curve panels and all other accessories and tools.
    2. Vacuum Resin Casting Equipment Our vacuum resin casting equipment is applicable for epoxy resin casting bushings, HV switch insulators, arc-distinguish coils, current transformers, potential transformers, dry-type transformers, as well as other electric apparatus.
      This machine is able to carry out with-stuffing and without-stuffing casting.
    2. Vacuum Impregnation Equipment Our vacuum impregnation equipment is mainly designed for insulation treatment of electrical products including wind turbines, power capacitor, high voltage motor, H-grade dry transformer, as well as cable insulation materials, and so on.
    2. Hydraulic Press Brake This hydraulic press brake is normal numeric control, without CNC control system. The adjustment of backgauge and ram stroke is manual.
      Steel-welded construction, vibration to eliminate stress, with high strength and good rigidity.
       Hydraulic top-drive, steadiness and reliability.
    2. Partial Discharge Test System The partial discharge test system is special to measure partial discharge of transformers, motors, cables, GIS, switches, arresters and others. It has special dual-channel measuring function which allows to make several tests to different items or several tests to different points on same item, it's also suitable to analyze discharging positions of big size transformers.
    2. Die Casting Machine Being made of hot-work iron or steel, nozzle, gooseneck and melting pot are especially.
       Heated by electric heater, nozzle and goose neck are safe and durable. This keeps temperature steady and avoids jamming of nozzle, resulting in no defective products.
      Auto central lubricating system, directly setting up times of toggle turning lubrication.
    2. EHV Circuit Breaker Analyzer The EHV circuit breaker KC-6A analyzer is standalone; it has a microprocessor-controlled, 6 dry contacts, analyzing extra high voltage circuit breaker's performance by testing contact time, stroke, speed and over-travel, etc.
    2. Oval Tube Finning Machine The heat exchanging oval tube finning machines are widely used in air cooling systems of power station and chemical plant. The tubes use an oval tube as a carrier, which is different to other traditional cooler fin tubes.
    2. Polyurethane Foam Injecting Machine This injecting machine is mainly used to inject rigid or soft polyurethane foam continuously for various thermal insulation purposes.
      Being controlled by PLC, this machine offers high accuracy, simple operation and convenient maintenance. The alarming relay will give alarms when pre-setting first injection is finished.
    2. CNC Coil Winder

      We have a variety of different CNC coil winding machines available for different applications:
      - Fully automatic air coil winding machine
      - Fully automatic speaker voice coil winding machine
      - Fully automatic wireless charging coil winding machine
      - Fully automatic miniature toroidal coil winding machine

    2. Wire Mesh Welding Machine This mesh welding machine is of full automatic, PLC control.
      The space between longitudes is adjustable before welding.
      The space between each woof can be preset in the PLC.
    2. Paper Taping Machine The configuration of the paper taping machine is on the basis of taping layers, quantity of wires required, and wire reel sizes. This device is able to perform single-wire taping or multi-wire taping. The taping layer ranges from 2 to 60 layers.
    2. Transformer Core Winding Machine

      We have various core winding machines:
      - Heavy-duty transformer core winding machine
      - Full automatic toroidal core winding machine
      - Semi-automatic toroidal core winding machine
      - Miniature magnetic core winding machine
    2. Steel Deck Roll Forming Machine Steel deck roll forming machine consists of mechanical expansion decoiler, feeding & embossing device, main forming unit, PLC control system, hydraulic mould cutting device and manual unloading rack. Different profiles of this steel deck roll forming machine are possible, which can meet all your customers' requirements.
    2. Automobile Radiator Making Machine We have a complete range of machinery for producing automobile radiators:
      - Aluminum microchannel flat tube cutting machine
      - Header pipe punching machine
      - Automatic core builder
      - Automatic tank clinching machine
      - Aluminum brazing furnace
    2. Copper Tube Flange Hole Punching Machine This copper tube flange hole punching machine is specially designed for punching holes on copper pipes used in radiators for air conditioner.
      Servo material feeding, hydraulic punching
      NC control, convenient operation
    2. Gas Spring Making Machine

      We have complete machines for producing gas springs:
      - Gas spring cylinder necking-in & grooving machine
      - Gas spring seal press fitting machine
      - Gas spring piston spin riveting machine
      - Gas spring air filling machine
      - Gas spring testing machine
      - Gas spring marking machine

    2. Automatic Chain Making Machine Auto feeding & straightening, auto forming
      Numerical control, quantity of links can be pre-set
      Easy operation, convenient mould change
    2. Transformer Core Cutting Machines We have various transformer core cutting machines available:
      Fully automatic CNC step-lap mitred core cut to length line (GEORG like)
      Compact swing shear step-lap mitred core cut to length line
      Distributed gap core cutting machine (UNICORE like)
      High speed electrical silicon steel rectangular / straight cutting machine
    2. Expressway Guard Rail Machine This expressway guard rail forming machine is mainly composed of mechanical decoiler, feeding & guiding device, leveling device, pre-punching station, roll forming unit, hydraulic mould cutting device, hydraulic station, PLC control system and unloading rack.
      The product of this roll forming machine is widely used as guard rail for expressway.
    2. Dished End Flanging Machine As the name suggests, this dished end flanging machine is designed for producing various kinds of dished ends through two steps, such as elliptical type, fleet dish type, conical type, spherical type, and so on. It is comprised of two machines: drum pressing machine and flanging machine.
    2. Impulse Voltage Generator Impulse voltage generators are used for conducting lightning impulse tests on electric cables, capacitors, bushings, power transformers and instrument transformers. They can carry out standing lightning full wave impulse tests, chopping wave impulse tests and standard operation wave impulse tests.
    2. Pin Finned Tube Welding Machine This pin finned tube welding machine employs Siemens SINUMERIK802 control system for easy and simple operation. The pin finned tube welding device is generally used to weld the steel pin to the base pipe for boilers. High automatic, the welding equipment is capable of completing pin feeding (2 heads), welding, indexing, base tube feeding, etc.
    2. CNG Cylinder Spinning Machine As a professional supplier, we are in the position to provide complete production line for manufacturing CNG cylinders, including automatic loading & unloading device, medium-frequency pre-heating device, hot spinning machine, conveyor, bottom pressing device, cylinder mouth threading device, cylinder inner wall shot blasting device, cylinder shoulder marking device, etc.
    2. Large Diameter Culvert Tunnel Pipe Machine Our large diameter culvert tunnel pipe machine is particularly developed for producing corrugated spiral steel pipes with large diameter. For high automation, the tunnel pipe machinery is equipped with PLC.
    2. CNC 3D Wire Bending Machine High speed, each bending process cost 1.0-1.5 second
      Heavy bending capacity for wire up to 10mm diameter (customized)
      This CNC wire bending machine is equipped with servo motor and air compressor as driven power to instead hydraulic pressure, thus keeping the machine clear and easy to maintain.
    2. CNC Plasma Cutting Machine Adopting ball screw plus servo motor driving system, this table type plasma cutting machine has a very high cutting speed and accuracy. So the cutting machine is especially suitable for making elbows, joints for HVAC round and square duct system. In addition, we can manufacture any CNC plasma cutting machine to meet your special requirements.
    2. CTC Production Line Our CTC production line is able to produce the continuous transposed conductors used in huge transformer windings with voltage of less than 1000MVA and 1000KV. This device is capable of stranding many flat copper wires together. It, through accurate mechanical actions of transposing head ...
    2. Arrester Tester The arrester tester checks AC electrical parameters of zinc oxide arresters, perfect instrument for both worksite and laboratory testing. It adopts advanced microcomputer as main control, full intelligent operation and strong anti-jamming ability for high precision measuring results.
    2. Spiral Fin Tube Welding Machine The high frequency spiral fin tube welding machine adopts PLC for double frequency conversion linkage control on the product.
      The material loading, clamping, feeding, welding, and material unloading can be completed automatically.
    2. CNC Spring Coiling Machine Thanks to the high precision detection device, the CNC spring coiling machine will stop automatically in case unqualified spring is detected.
      Both the outer diameter and the angel of spring can be revised in real time according to the working condition displayed on HMI.
    2. Transformer Coil Winding Machine

      We have a variety of coil winding machines for distribution transformers and power transformers available:
      LV coil winding machine
      HV coil winding machine with automatic wire guiding device
      Fully automatic coil winding machine with auto insulation winding
      Fully automatic multiple coil winding machine
      Vertical coil winding machine for power transformer

    2. Steel Grating Welding Machine This steel grating welding machine is composed of gantry type welding machine, double-layer flat steel feeding device, cross bar auto falling device, steel grating hauling device, hydraulic & pneumatic system, cooling system, electric control system, etc.
    2. Extruded Fin Tube Machine Tool holder and its body adopt the advanced dual-circular key structure to withstand torque and achieve accurate and reliable displacement.
      Tool holder adopts split type design, making blade installation, debugging and cleaning operations easier.
    2. Spiral Filter Core Forming Machine Any length can be cut according to customer's requirement.
      By adjusting clutch, the spiral forming machine can be suitable for materials of different thick.
      Adopting PLC control system, this forming machine offers high efficiency, stable quality, less procedures and materials, thus reducing the production cost.
    2. Pulley Spinning Machine Our pulley spinning equipment has two functions, namely center bearing hubs flow forming, and blank material folding and multi-grooves spinning. The horizontal pulley spinning machine, which can be constructed with four or five stations, supports automatic tool changing. This range of pulley spinning machine is well received because of the simple operation and high efficiency.
    2. APG Epoxy Resin Casting Machine Our WHAG-888 APG Epoxy Resin Casting Machine adopts the automatic pressure gelation processing technology. It is used to cast high voltage electrical components with epoxy resin. The APG technology can reduce the casting duration from dozen hours (by conventional vacuum casting method) to dozen minutes.
    2. Fan Parts Spinning Machine The fan parts spinning machine is specially offered for industrial fans. This fan parts spinning device can be used for flanging drum and wind collector for axial fans, spinning air inlet and front disc of centrifugal blower through one-step forming. Apart from that, our axial fan part making machine can be employed for making bead for air duct and expanded duct, as well.
    2. Transformer Radiator Fin Plate Forming and Welding Line Our transformer radiator fin plate forming and welding line take advantage of the technology from Germany GEORG and Canadian MTM. It is designed mainly to manufacture fin plate of different widths (520 or 535mm, 480mm, 320 or 310mm) with high efficiency.
    2. Aluminum Flexible Duct Machine This aluminum flexible duct forming machine is specially designed for producing aluminum flexible ducts with aluminum foil or metalized PET film with steel wire reinforced for ventilation purpose.
      Diameter of aluminum flexible duct: 80-600mm
      Length of aluminum flexible duct: 1-10m
    2. Tube Cutting Machine The tube cutting machine is a NC cut-to-length machine for straightening coil copper tubes and cutting it into the length required, automatically. It adopts special cutting technology, resulting in chipless cutting and small deformation of the cutting section.
    2. H-beam Production Line This line consists of CNC controlled straight/profile flame cutting machine, H-beam auto assembling machine, gantry type H-beam welding machine, H-beam steel rectifying machine and shot-blasting machine.
    2. Air Conditioner Radiator Core Making Machines

      We own and operate a variety of machines for processing air conditioner radiator cores:
      - Aluminum fin punching press
      - Radiator core tube expanding machine
      - Copper pipe U bending machine
      - Condenser core U L G bending machine

    2. SF6 Analyzing Meter The SF6 Analyzing Meter is a modern instrument, measuring moisture content in hydrogen, nitrogen, other inert gases and non-corrosive gases, especially SF6 gas, in high precision. It's used in SF6 switches distribution station, hydrogen station and hydrogen-cooling generators, also used in petrochemical and metallurgical industry, environmental protection industry, scientific research institutes and other fields.